Description
60 W/2.5 A DIN-rail 24 VDC power supply, universal 85 to 264 VAC or 120 to 370 VDC input voltage, -30 to 70°C operating temperature
Output Power Parameters
-
Wattage
- 60 W
-
Voltage
- 24 VDC
-
Current Rating
- 0 to 2.5 A
-
Ripple and Noise
- 150 mVp-p
-
Voltage Adjustment Range
- 21.6 to 29 VDC
-
Setup/Rise Time at Full Load
- 500 ms, 50 ms at 230 VAC
500 ms, 50 ms at 115 VAC
- 500 ms, 50 ms at 230 VAC
-
Typical Hold Up Time at Full Load
- 30 ms at 230 VAC
12 ms at 115 VAC
- 30 ms at 230 VAC
Input Power Parameters
-
Voltage Range
- 85 to 264 VAC (47 to 63 Hz)
120 to 370 VDC
- 85 to 264 VAC (47 to 63 Hz)
-
Typical Efficiency
- 90%
-
Typical Current
- 0.8 A @ 230 VAC, 1.2 A @ 115 VAC
-
Inrush Current (cold start)
- 60 A @ 230 VAC, 30 A @ 115 VAC
Overload Protection
-
Rated Output Power
- 105 to 160%
-
Protection Type
- Constant current limiting, recovers automatically after fault condition is removed
Overvoltage Protection
-
Over-Voltage Range
- 30 to 36 V
-
Protection Type
- Shut down operating voltage, repower on to recover
Physical Characteristics
-
Housing
- Plastic
-
Dimensions
- 52.5 x 90 x 54.5 mm (2.07 x 3.54 x 2.15 in)
-
Weight
- 230 g (0.5 lb)
Environmental Limits
-
Operating Temperature
- -30 to 70°C (-22 to 158°F)
-
Storage Temperature
- -40 to 85°C (-40 to 167°F)
-
Max. Operating Temperature at Full Load
- 45°C (113°F)
-
Ambient Relative Humidity
- 20 to 90% (non-condensing)
Standards and Certifications
-
Safety
- UL 508, EN 62368-1, UL 62368-1, IEC 62368-1
-
EMC
- EN 55032/24, EN 61000-3-2 Class A, EN 61000-3-3
-
EMS
- IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 6000 MHz: 10 V/m
IEC 61000-4-4 EFT: Power: 2 kV
IEC 61000-4-5 Surge: Power: 2 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8 PFMF
IEC 61000-4-11 DIPs
- IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
MTBF
-
Time
- 927,560 hrs
-
Standards
- MIL-HDBK-217F
Warranty
3 years
