Description
8 GbE copper + 2 GbE SFP multiport industrial secure router with Firewall/NAT/VPN, 120/220 VDC/VAC input voltage, -40 to 75°C operating temperature
Input/Output Interface
-
Alarm Contact Channels
- Resistive load: 1 A @ 24 VDC
-
Buttons
- Reset button
-
Digital Input Channels
- +13 to +30 V for state 1
-30 to +3 V for state 0
Max. input current: 8 mA
- +13 to +30 V for state 1
Ethernet Interface
-
10/100/1000BaseT(X) Ports (RJ45 connector)
- 8
-
1000BaseSFP Slots
- 2
-
Standards
- IEEE 802.1Q for VLAN Tagging
IEEE 802.3 for 10BaseT
IEEE 802.3ab for 1000BaseT(X)
Static Port Trunk
IEEE 802.3u for 100BaseT(X)
IEEE 802.3x for flow control
IEEE 802.3z for 1000BaseSX/LX/LHX/ZX
IEEE 802.1X for authentication
- IEEE 802.1Q for VLAN Tagging
-
DMZ
- User-configurable DMZ ports
Ethernet Software Features
-
Broadcast Forwarding
- IP directed broadcast, broadcast forwarding
-
Management
- Back Pressure Flow Control
DDNS
DHCP Server/Client
Web Console (HTTP/HTTPS)
LLDP
QoS/CoS/ToS
SNMPv1/v2c/v3
Telnet
TFTP
HTTPS
SSH
- Back Pressure Flow Control
-
Redundancy Protocols
- RSTP
STP
Turbo Ring v2
Turbo Chain
- RSTP
-
Routing Throughput
- Max. 350K packets per second / 2 Gbps (based on RFC 2544)
-
Routing Table
- Max. 4K routing rules
-
Concurrent Connections
- Max. 400K (based on RFC 3511)
-
Connections Per Second
- Max. 20K (based on RFC 3511)
-
Routing Redundancy
- VRRP
-
Security
- Secure Boot
IPsec
L2TP (server)
RADIUS
Trust access control
TACACS+
- Secure Boot
-
Time Management
- NTP Server/Client
SNTP
- NTP Server/Client
-
Unicast Routing
- OSPF
RIPV1/V2
Static Route
- OSPF
-
Multicast Routing
- Static Route
-
Filter
- IGMP v1/v2/v3
Switch Properties
-
VLAN ID Range
- VID 1 to 4094
-
IGMP Groups
- 256
-
Max. No. of VLANs
- 16
LED Interface
-
LED Indicators
- PWR1, PWR2, STATE, MSTR/H.TC, CPLR/T.TC, VRRP/HA, VPN, USB
DoS and DDoS Protection
-
Technology
- ARP-Flood
FIN Scan
ICMP Flood
TCP Sessions Without SYN
NMAP-ID Scan
NMAP-Xmas Scan
Null Scan
SYN/FIN Scan
SYN/RST Scan
SYN-Flood
Xmas Scan
- ARP-Flood
Firewall
-
Filter
- DDoS
Ethernet protocols
ICMP
IP address
MAC address
Ports
- DDoS
-
Stateful Inspection
- Router firewall
Transparent (bridge) firewall
- Router firewall
-
Deep Packet Inspection
- DNP3
EtherNet/IP
IEC 60870-5-104
IEC 61850 MMS
Modbus TCP
Modbus UDP
Omron FINS
Siemens S7 Comm.
Additional protocols will be supported through future firmware updates.
- DNP3
-
Intrusion Prevention System
- Requires an additional license.
-
Throughput
- Firewall:
Max. 350K packets per second / 2 Gbps (based on RFC 2544)
IPS:
Max. 200K packets per second / 2 Gbps (based on RFC 2544)
- Firewall:
IPsec VPN
-
Authentication
- MD5 and SHA (SHA-256)
RSA (key size: 1024-bit, 2048-bit)
X.509 v3 certificate
- MD5 and SHA (SHA-256)
-
Concurrent VPN Tunnels
- Max. 250 IPsec VPN tunnels
-
Encryption
- DES
3DES
AES-128
AES-192
AES-256
- DES
-
Protocols
- IPsec
L2TP (server)
PPTP (client)
- IPsec
-
Throughput
- Conditions: AES-256, SHA-256
Max. 100K packets per second / 800 Mbps (based on RFC 2544)
- Conditions: AES-256, SHA-256
NAT
-
Features
- 1-to-1
N-to-1
NAT loopback
Port forwarding
- 1-to-1
Real-Time Firewall / VPN Event Log
-
Event Type
- Firewall event
VPN event
- Firewall event
-
Media
- Local storage
SNMP Trap
Syslog server
- Local storage
Serial Interface
-
Console Port
- RS-232 (TxD, RxD, GND), 3-pin (115200, n, 8, 1)
-
Connector
- USB Type-C
Power Parameters
-
Connection
- Removable terminal block
-
Input Voltage
- 120/240 VDC/VAC
Redundant dual inputs
- 120/240 VDC/VAC
-
Operating Voltage
- 88 to 300 VDC, 90 to 264 VAC
-
Input Current
- 0.15 A @ 120 VDC
0.08 A @ 240 VDC
0.18 A @ 240 VAC
0.28 A @ 120 VAC
- 0.15 A @ 120 VDC
-
Reverse Polarity Protection
- Supported
Physical Characteristics
-
Housing
- Metal
-
Dimensions
- 64 x 135 x 105 mm (2.52 x 5.31 x 4.13 in)
-
Weight
- 1150 g (2.54 lb)
-
Installation
- DIN-rail mounting (DNV-certified)
Wall mounting (with optional kit)
- DIN-rail mounting (DNV-certified)
Environmental Limits
-
Operating Temperature
- -40 to 75°C (-40 to 158°F)
-
Storage Temperature (package included)
- -40 to 85°C (-40 to 185°F)
-
Ambient Relative Humidity
- 5 to 95% (non-condensing)
Standards and Certifications
-
Safety
- IEC 62368-1
UL 62368-1
IEC 60950-1
UL 60950-1
- IEC 62368-1
-
EMC
- EN 55032/35
-
EMI
- CISPR 32, FCC Part 15B Class A
-
EMS
- IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 4 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8 PFMF
- IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
-
Industrial Cybersecurity
- IEC 62443-4-1
IEC 62443-4-2
- IEC 62443-4-1
-
Power Substation
- IEEE 1613
IEC 61850-3 Edition 2.0
- IEEE 1613
-
Shock
- IEC 60068-2-27
-
Freefall
- IEC 60068-2-32
-
Vibration
- IEC 60068-2-6
MTBF
-
Time
- 509,714 hrs
-
Standards
- Telcordia (Bellcore), GB
Warranty
5 years