802.11a/b/g/n/ac access point, UN band, IP68, -40 to 75°C operating temperature
WLAN Interface
-
WLAN Standards
- 2.4 GHz: 802.11b/g/n with 256 QAM support
5 GHz: 802.11a/n/ac Wave 2 with 256 QAM support
-
Frequency Band for UN (20 MHz operating channels)
- 2.412 to 2.484 GHz (14 channels)
5.180 to 5.240 GHz (4 channels)
5.260 to 5.320 GHz (4 channels)
5.500 to 5.700 GHz (11 channels)
5.745 to 5.825 GHz (5 channels)
Available channels change depending on the selected country or region code.
-
Wireless Security
- WPA/WPA2/WPA3-Enterprise (IEEE 802.1X/RADIUS, TKIP, AES)
WPA/WPA2/WPA3-Personal
-
Transmission Rate
- 2.4 GHz:
802.11b: 1 to 11 Mbps
802.11g: 6 to 54 Mbps
802.11n: 6.5 to 400 Mbps
5 GHz:
802.11a: 6 to 54 Mbps
802.11n: 6.5 to 300 Mbps
802.11ac: 6.5 to 867 Mbps
-
Transmitter Power for 802.11a (Dual Chain)
- 24±1.5 dBm @ 6 Mbps
22±1.5 dBm @ 54 Mbps
-
Transmitter Power for 802.11n (5 GHz, Dual Chain)
- 24±1.5 dBm @ MCS0 20 MHz
21±1.5 dBm @ MCS7 20 MHz
23±1.5 dBm @ MCS0 40 MHz
21±1.5 dBm @ MCS7 40 MHz
-
Transmitter Power for 802.11ac (Dual Chain)
- 23.5±1.5 dBm @ MCS0 20 MHz
20.5±1.5 dBm @ MCS8 20 MHz
23.5±1.5 dBm @ MCS0 40 MHz
20±1.5 dBm @ MCS9 40 MHz
22.5±1.5 dBm @ MCS0 80 MHz
20±1.5 dBm @ MCS9 80 MHz
-
Transmitter Power for 802.11b (Dual Chain)
- 27.5±1.5 dBm @ 1 Mbps
28±1.5 dBm @ 11 Mbps
-
Transmitter Power for 802.11g (Dual Chain)
- 28±1.5 dBm @ 6 Mbps
25±1.5 dBm @ 54 Mbps
-
Transmitter Power for 802.11n (2.4 GHz, Dual Chain)
- 26±1.5 dBm @ MCS0 20 MHz
24±1.5 dBm @ MCS7 20 MHz
26±1.5 dBm @ MCS0 40 MHz
24.5±1.5 dBm @ MCS7 40 MHz
-
Receiver Sensitivity for 802.11a (measured at 5.680 GHz)
- Typ. -88 @ 6 Mbps
Typ. -71 @ 54 Mbps
-
Receiver Sensitivity for 802.11n (5 GHz; measured at 5.680 GHz)
- Typ. -87 dBm @ MCS0 20 MHz
Typ. -68 dBm @ MCS7 20 MHz
Typ. -83 dBm @ MCS0 40 MHz
Typ. -66 dBm @ MCS7 40 MHz
-
Receiver Sensitivity for 802.11ac
- Typ. -87 dBm @ MCS0 20 MHz
Typ. -64 dBm @ MCS8 20 MHz
Typ. -84 dBm @ MCS0 40 MHz
Typ. -59 dBm @ MCS9 40 MHz
Typ. -81 dBm @ MCS0 80 MHz
Typ. -56 dBm @ MCS9 80 MHz
-
Receiver Sensitivity for 802.11b (measured at 2.437 GHz)
- Typ. -93 dBm @ 1 Mbps
Typ. -86 dBm @ 11 Mbps
Note: Concurrent USB read/write activity on the device may generate interference and may mildly affect receiver sensitivity performance. It is recommended to avoid USB activity on the device in mission-critical applications.
-
Receiver Sensitivity for 802.11g (measured at 2.437 GHz)
- Typ. -88 dBm @ 6 Mbps
Typ. -71 dBm @ 54 Mbps
Note: Concurrent USB read/write activity on the device may generate interference and may mildly affect receiver sensitivity performance. It is recommended to avoid USB activity on the device in mission-critical applications.
-
Receiver Sensitivity for 802.11n (2.4 GHz; measured at 2.437 GHz)
- Typ. -87 dBm @ MCS0 20 MHz
Typ. -68 dBm @ MCS7 20 MHz
Typ. -84 dBm @ MCS0 40 MHz
Typ. -66 dBm @ MCS7 40 MHz
Note: Concurrent USB read/write activity on the device may generate interference and may mildly affect receiver sensitivity performance. It is recommended to avoid USB activity on the device in mission-critical applications.
-
WLAN Operation Mode
- Access point
Client
Client-Router
Master
Slave
Sniffer
-
Antenna
- External, 3/6 dBi
Omni-directional
-
Antenna Connectors
Ethernet Interface
-
Standards
- IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3af for PoE
IEEE 802.3at for PoE
IEEE 802.3az for Energy-Efficient Ethernet
IEEE 802.1Q for VLAN Tagging
IEEE 802.1X for authentication
-
10/100/1000BaseT(X) Ports (RJ45 connector)
-
PoE Ports (10/100/1000BaseT(X), RJ45 connector)
Ethernet Software Features
-
Management
- DHCP Server
DHCP Client
DNS
HTTP
IPv4
LLDP
SMTP
SNMPv1/v2c/v3
Syslog
TCP/IP
Telnet
UDP
VLAN
MXconfig
-
Routing
- Port forwarding
Static Route
NAT
-
Security
- HTTPS/SSL
RADIUS
SSH
Certificate Management
-
Time Management
Firewall
-
Filter
- ICMP
MAC address
IP protocol
Port-based
Wi-Fi ACL
Client Isolation
LED Interface
-
LED Indicators
- PWR, LAN1, LAN2, 2.4G, 5G, SYS
Input/Output Interface
-
Digital Inputs
- 2
Max. input current: 8 mA
+13 to +30 V for state 1
+3 to -30 V for state 0
-
Alarm Contact Channels
- Relay output with current carrying capacity of 1 A @ 24 VDC
-
Buttons
Physical Characteristics
-
Housing
-
Dimensions
- 66.5 x 157.6 x 244 mm (2.56 x 6.20 x 9.61 in)
-
IP Rating
-
Weight
-
Installation
- Wall mounting
DIN-rail mounting (with optional kit)
Pole mounting (with optional kit)
Power Parameters
-
Input Current
-
Input Voltage
- 12 to 48 VDC
Redundant dual inputs
48 VDC Power-over-Ethernet
-
Power Connector
- M12 A-coded 5-pin male connector
-
Power Consumption
Environmental Limits
-
Operating Temperature
- -40 to 75°C (-40 to 167°F)
-
Storage Temperature (package included)
- -40 to 85°C (-40 to 185°F)
-
Ambient Relative Humidity
- 5 to 95% (non-condensing)
Standards and Certifications
-
EMC
- EN 61000-6-2/-6-4
EN 55032/35
-
EMI
- CISPR 32, FCC Part 15B Class A
-
EMS
- IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV
IEC 61000-4-6 CS: 10 V/m
IEC 61000-4-8 PFMF: 30 A/m
-
Safety
- IEC 60950-1
IEC 62368-1
UL 62368-1
-
Vibration
-
Radio
- EN 300 328, EN 301 489-1/17, EN 301 893, ANATEL, FCC, MIC, NCC, RCM, SRRC, WPC, KC, NBTC, IC
-
Industrial Cybersecurity
- IEC 62443-4-1
IEC 62443-4-2
