Full Motion, 1-ch Industrial Video Encoder, 2 10/100BaseT(X) Ethernet port, -25 to 60C
Input/Output Interface
-
Digital Input Channels
-
Digital Inputs
- +13 to +30 V for state 1
-30 to +1 V for state 0
Max. input current: 8 mA
-
Relay Channels
-
Contact Current Rating
- Resistive load: 1 A @ 24 VDC
-
Connector
Ethernet Interface
-
10/100BaseT(X) Ports (RJ45 connector)
Ethernet Software Features
-
Protocols
- TCP/IP, IPv4/IPv6, UDP, HTTP, RTP/RTSP, ARP, UPnP, FTP, TFTP, SMTP, NTP Client, DNS, DDNS, QoS, IGMP v3, ICMP, SNMPv1/v2c/v3, Modbus TCP, HTTPS, 802.1X, NTCIP
Security Functions
-
Password
- User-level password protection
-
Filter
-
Authentication
-
Encryption
LED Interface
-
LED Indicators
- STAT: Indicates if system is booted up properly or not
Power 1: Power 1 on/off
Power 2: Power 2 on/off
FAULT: Can be configured to correspond to system alarm, power failure, or disconnected network
Video: Video input signal
PTZ: Indicates if PTZ or COM port data has been transmitted
SD: Indicates if SD card was mounted successfully
Network: 10 Mbps or 100 Mbps
Serial Interface
-
PTZ Port
- 1, RS-232 or RS-422/485 port, terminal block connector, 115.2 kbps
-
COM Port
- 1, RS-232 or RS-485 port, DB9 male connector, 115.2 kbps
-
Console Port
- 1 RS-232 port, 10-pin RJ45 (115200, n, 8, 1)
Power Parameters
-
No. of Power Inputs
-
Input Voltage
-
Operating Voltage
- 12 to 32 VDC, 18 to 30 VAC
-
Input Current
- 0.85 A @ 12 VDC, 0.3 A @ 32 VDC
0.56/0.85 A @ 30/18 VAC
-
Power Connector
Video Interface
-
Video Compression
- H.264 (ISO/IEC 14496-10) or MJPEG
-
Video Input
- 1, BNC connector (1.0 Vpp, 75 ohm)
-
Video Output
-
Video Streams
- 4 independent H.264 or MJPEG video streams
-
NTSC/PAL
-
Video Viewing
- DynaStream™ support for changing the video frame rate automatically
CBR Pro™ for good image quality in limited bandwidth transmissions
Adjustable image size and quality
Timestamp and text overlay
OSD (On Screen Display) position adjustable
Image manipulation: 180° rotation
Image tuning: control brightness, contrast, saturation
Maximum of 10 simultaneous unicast connections, 50 multicast clients
Audio Interface
-
Audio Inputs
- 1 Line-in or MIC-in with 3.5 mm phone jack
-
Audio Outputs
- 1 Line-out, with 3.5 mm phone jack
-
Audio Format
Camera Software Development
-
VPort SDK PLUS
- Includes CGI commands, ActiveX Control, and API library for customized applications or system integration for third-party developers
-
Video Standards
Camera PAN/TILT/ZOOM
-
PTZ Camera Control
-
PTZ Control Functions
- Pan, tilt, zoom, focus, move speed, preset position (max. 128 positions)
-
PTZ Function Updates
-
Protocols
- Pelco D, Pelco P, Custom Camera
Camera Alarm Software Features
-
Intelligent Video
- Camera tampering detection
-
Video Motion Detection
- 3 independently configurable areas
-
Scheduling
- Daily repeat timing schedule
-
Imaging
- JPEG snapshots for pre/trigger/post alarm images
-
Custom Alarms
- HTTP event servers for setting customized alarm actions
-
Email/FTP Messaging
- Automatic transfer of stored images via email or FTP as event-triggered actions
-
Pre-Alarm Buffer
- 50 MB video buffer for JPEG snapshot images
-
Video Recording
- Event recordings stored on the SD card
Software Requirements
-
Memory Size
-
Operating System
-
Browser
- Internet Explorer 9.x or above
-
Multimedia
Physical Characteristics
-
Housing
-
Dimensions
- 46 x 134 x 105 mm (1.81 x 5.31 x 4.13 in)
-
Weight
-
Installation
- DIN-rail mounting, Wall mounting (with optional kit)
Environmental Limits
-
Operating Temperature
- -25 to 60°C (-13 to 140°F)
-
Storage Temperature (package included)
- -40 to 85°C (-40 to 185°F)
-
Ambient Relative Humidity
- 5 to 95% (non-condensing)
-
Altitude
Standards and Certifications
-
EMI
- CISPR 32, FCC Part 15B Class A
-
EMS
- IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8 PFMF
IEC 61000-4-11 DIPs
-
Freefall
-
Safety
-
Shock
-
Traffic Control
-
Vibration
