EN50155, FHD, H.264 / MJPEG external IP camera, M12 connector, PoE, 8.0mm Lens, -25 to 55C operating temperature
Input/Output Interface
-
Digital Output Channels
-
Contact Current Rating
- Resistive load: 1 A @ 24 VDC
-
Connector
- 5-pin A-coded male M12 connector with 20 cm cable
Ethernet Interface
-
PoE Ports (10/100BaseT(X), M12 D-coded 4-pin female connector)
Ethernet Software Features
-
Protocols
- TCP/IP, IPv4/IPv6, UDP, HTTP, RTP/RTSP, ARP, UPnP, FTP, TFTP, SMTP, NTP Client, DNS, DDNS, QoS, IGMP v3, ICMP, SNMPv1/v2c/v3, DHCP Opt66/67, HTTPS
Security Functions
-
Password
- User-level password protection
-
Filter
-
Encryption
Power Parameters
-
No. of Power Inputs
-
Source of Input Power
-
Input Voltage
- 24 VDC for front-window heater (for defrosting)
-
Input Current
- 0.167 A @ 48 VDC, 0.9 A @ 24 VDC
-
Power Connector
-
Note
- PoE is for powering the camera; 24 VDC is for powering the heater
Camera Characteristics
-
Sensor
- 1/3-in 1080P progressive scan CMOS
-
Lens
- f=8.0 mm, F1.6, Diagonal 42°, Horizontal 33°, Vertical 17°
-
Minimum Illumination
- Color: 0.2 lux, at F1.6 (Gain High, 50 IRE, 1/30 sec)
B/W: 0.05 lux, at F1.6 (Gain High, 50 IRE, 1/30 sec)
-
Day & Night
- Auto/Color/BW; ICR control
-
ICR Control
-
Synchronization
-
White Balance
-
Electronic Shutter
- Auto, Fixed (1/30 to 1/25000 sec)
-
S/N Ratio
- Maximum 50 dB (AGC off; DNR on)
-
DNR (digital noise reduction)
-
WDR (wide dynamic range)
-
AGC (auto gain control)
-
Flickerless Control
- Automatic, 50 Hz, 60 Hz modes
-
Image Rotation
- Flip, Mirror, 90°, 180°, 270° rotation
-
Image Setting
- Manual tuning with saturation, sharpness, and contrast
-
Camera Angle
- Pan: ±5°, Tilt: +10/-5° (controlled manually)
Video Interface
-
Video Compression
- H.264 (ISO/IEC 14496-10) or MJPEG
-
Video Output
-
Video Streams
- 4 independent H.264 or MJPEG video streams
-
NTSC/PAL
-
Video Resolution and FPS (frames per second)
-
Video Resolution and FPS (frames per second)
-
Video Viewing
- DynaStream™ support for changing the video frame rate automatically
CBR Pro™ for good image quality in limited bandwidth transmissions
3 privacy mask areas provided
Adjustable image size and quality
Timestamp and text overlay
OSD (On Screen Display) position adjustable
Maximum of 5 simultaneous unicast connections, 50 multicast clients
Digital PTZ
Camera Software Development
Camera Alarm Software Features
-
Intelligent Video
- Camera tampering detection
-
Video Motion Detection
- 3 independently configurable areas
-
Shock Detection
-
Humidity
- Detects camera’s internal humidity
-
Scheduling
- Daily repeat timing schedule
-
Imaging
- JPEG snapshots for pre/trigger/post alarm images
-
Custom Alarms
- HTTP event servers for setting customized alarm actions
-
Email/FTP Messaging
- Automatic transfer of stored images via email or FTP as event-triggered actions
-
Pre-Alarm Buffer
- 50 MB video buffer for JPEG snapshot images
-
Video Recording
- Event recordings stored on the SD card
Software Requirements
-
Memory Size
-
Operating System
-
Browser
- Internet Explorer 9.x or above
-
Multimedia
Physical Characteristics
-
Housing
- Metal
IP67
Transparent Glass cover
-
Dimensions
- 83 x 168 x 233 mm (3.27 x 6.61 x 8.78 in)
-
Weight
-
Installation
Environmental Limits
-
Operating Temperature
- -25 to 55°C (-13 to 131°F)
-
Storage Temperature (package included)
- -40 to 85°C (-40 to 185°F)
-
Ambient Relative Humidity
- 5 to 95% (non-condensing)
-
Ingress Protection
-
Salt Spray Test
- ASTM B368 (CASS), 125 hours
-
Altitude
Standards and Certifications
-
EMI
- CISPR 32, FCC Part 15B Class A
-
EMS
- IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8 PFMF
-
Freefall
-
Railway Fire Protection
-
Safety
-
Shock
- IEC 60068-2-27, IEC 61373, EN 50155
-
Vibration
- IEC 60068-2-64, IEC 61373, EN 50155
-
Railway
- EN 50155 (complies with a portion of EN 50155 specifications)
