Industrial 16-Port Serial Device Server, DB9(M), RS-232/422/485, RJ45, dual pwr input
| Hardware Specifications |
|
| CPU |
Texas Instruments Sitara ARM Cortex A8 AM3352 1000MHz |
| Flash |
32 MB NOR Flash (customizable upon request up to 64 MB) |
| RAM |
256 MB DDR3 (customizable upon request up to 1 GB) |
| EEPROM |
24LC64 |
| Watchdog |
ADM706 |
| Real Time Clock (RTC) |
Yes - with external chip |
| Buzzer |
Yes |
| Console port |
Yes - RJ45 Serial Console |
| Reset Button |
Yes |
| Network Interface |
|
| Standards |
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100BaseF(X) |
| Ethernet Ports |
6x 10/100 BASE-T(X) RJ45 or
6x 100 BASE-F(X) SFP Slots (SFP version) |
| Ethernet Switch |
Embedded 8-Ports Fast-Ethernet Switch (configurable). Each port can work
as single Subnet or as Switch |
| Serial Interface |
|
| Connector |
DB version: D-Sub9 (DB9) connector
TB and SiS version: 5-Pin Terminal Block (5.08mm) |
| Ports |
SE5908A: 8-ports (RS-232 (supports only 5-pin mode)/RS-422/RS-485)
SE5916A: 16-ports (RS-232 (supports only 5-pin mode)/RS-422/RS-485) |
| Serial Console |
1x Serial Console port (RJ45) |
| Serial Port Isolation |
3 kV (SiS version only) |
| Pull-high / Pull-low /Term. resistors |
Software Selectable |
| Baud Rate |
50 ~ 921,600bps |
| Data Bits |
5, 6, 7, 8 |
| Stop Bits |
1, 2 |
| Flow Control |
None, Xon/Xoff, RTS/CTS (RS-232 only) |
| Other interfaces |
|
| USB ports |
No |
| SD Card |
SD card slot (internal) |
| Relay Output |
1x 1A@30VDC (Normal open) |
| Software |
| Bootloader |
U-boot 2014.07 |
| Linux kernel |
Linux 3.14.26 |
| Linux toolchain |
Linux 32 bits toolchain gcc (C/C++ PC cross compiler), glibc |
| Linux sample code |
RS232, RS485, RTC, watchdog, LED, Buzzer, Button, network socket |
| Power |
| Rated Aupply Voltage |
Redundant 24-48 VDC or
Redundant 100-240 VAC/ 100-370 VDC (HV Series) |
| Input Voltage Range |
Redundant 19.2-52.8 VDC or
Redundant 85-264 VAC/ 100-370 VDC (HV Series) |
| Input Current |
0.73 A @ 24 VDC
0.35 A @ 100 VAC
0.20 A @ 100 VDC |
| Power Consumption |
Approximately 20 W |
| Connector |
10-Pin Terminal Block |
| Power Redundancy |
Yes |
| Reverse Polarity Protection |
Yes |
| Environmental |
| Operating Temperature |
-40°C to +80°C (-40°F to +176°F) |
| Storage Temperature |
-40°C~85°C (-40°F~185°F) |
| Ambient Relative Humidity |
5%~95%, 55° (Non-condensing) |
| Mechanical |
| Housing |
IP30 protection, SPCC metal housing |
| Dimensions(W x H x D) |
440.6 x 44 x 309 mm (1U Rack-mount) |
| Installation |
19’’ Rack-Mount (Kit included) |
| Weight |
4,000g |
| Reset Button |
Yes |
