Layer 3 modular managed Ethernet switch with 4 100/1000BaseSFP ports, 3 slots for Ethernet modules, PoE Ethernet module supported, 1 isolated power supply (24/48 VDC), -40 to 75°C operating temperature
Input/Output Interface
-
Alarm Contact Channels
- 1 relay output with current carrying capacity of 2 A @ 24 VDC
-
Buttons
Ethernet Interface
-
100/1000BaseSFP Slots
-
Module
- There are 3 module slots on the switch. Users can select different types of modules to insert into the switch. The modules that can be selected include 8-port/6-port modules with 10/100/1000BaseT(X), 10/100BaseT(X), 100/1000BaseSFP, or 100BaseFX (SC/ST connector) interfaces.
Refer to Expansion Modules in the Accessories section for a full list of supported interface modules.
-
Standards
- IEEE 802.1D-2004 for Spanning Tree Protocol
IEEE 802.1p for Class of Service
IEEE 802.1Q for VLAN Tagging
IEEE 802.1s for Multiple Spanning Tree Protocol
IEEE 802.1w for Rapid Spanning Tree Protocol
IEEE 802.1X for authentication
IEEE 802.3 for 10BaseT
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3ad for Port Trunk with LACP
IEEE 802.3u for 100BaseT(X) and 100BaseFX
IEEE 802.3x for flow control
IEEE 802.3z for 1000BaseSX/LX/LHX/ZX
Ethernet Software Features
-
Management
- IPv4/IPv6
Note: IPv6 is available for L2 models only.
Flow control
Back Pressure Flow Control
DHCP Server/Client
Note: DHCP Server/Client is available for L2 models only.
ARP
RARP
LLDP
Linkup Delay
SMTP
SNMP Trap
SNMP Inform
SNMPv1/v2c/v3
RMON
TFTP
SFTP
HTTP
HTTPS
Telnet
Syslog
Private MIB
Fiber check
DHCP Relay Agent (Option 82)
Port Mirroring (SPAN, RSPAN)
-
Filter
- GMRP
GVRP
GARP
802.1Q
IGMP Snooping v1/v2/v3
IGMP Querier
-
Redundancy Protocols
- Multiple Dual Homing
Tracking
Multiple Network Coupling
MRP Interconnection
-
Routing Redundancy
-
Security
- IEEE 802.1AE MAC security
-
Time Management
- SNTP
IEEE 1588v2 PTP (hardware-based)
Supported power profiles: IEEE 1588 Default 2008, IEC 61850-9-3-2016, IEEE C37.238-2017
NTP Server/Client
NTP Authentication
-
Protocols
-
Industrial Protocols
-
Unicast Routing
-
Multicast Routing
- PIM-DM
PIM-SM
Multicast Local Route
-
MIB
- P-BRIDGE MIB
Q-BRIDGE MIB
IEEE8021-SPANNING-TREE-MIB
IEEE8021-PAE-MIB
IEEE8023-LAG-MIB
LLDP-EXT-DOT1-MIB
LLDP-EXT-DOT3-MIB
SNMPv2-MIB
RMON MIB Groups 1, 2, 3, 9
-
Power Substation
Switch Properties
-
IGMP Groups
-
Jumbo Frame Size
-
MAC Table Size
-
Max. No. of VLANs
-
Packet Buffer Size
-
Priority Queues
-
VLAN ID Range
LED Interface
-
LED Indicators
- PWR1, PWR2, STATE, FAULT, MSTR/HEAD, CPLR/TAIL, SYNC, EPS
Power Parameters
-
Total PoE Power Budget
-
Max. PoE Power Output per Port
- IEEE 802.3af: 15.4 W
IEEE 802.3at: 30 W
IEEE 802.3bt: 90 W
-
Input Voltage
- 48 VDC (for the PoE system)
24/48 VDC
-
Operating Voltage
- 46 to 57 VDC (for the PoE system)
18 to 72 VDC
-
Overload Current Protection
-
Reverse Polarity Protection
-
Input Current
- Max. 2.53 A @ 24 VDC
Max. 1.25 A @ 48 VDC
EPS: Max. 7.50 A @ 48 VDC
-
Power Consumption (Max.)
- Max. 60.72 W @ 24 VDC
Max. 60 W @ 48 VDC
Physical Characteristics
-
IP Rating
-
Dimensions
- 440 x 44 x 300 mm (17.32 x 1.37 x 11.81 in)
-
Weight
-
Installation
Environmental Limits
-
Operating Temperature
- -40 to 75°C (-40 to 167°F)
-
Storage Temperature (package included)
- -40 to 85°C (-40 to 185°F)
-
Ambient Relative Humidity
- 5 to 95% (non-condensing)
Standards and Certifications
-
Safety
- EN IEC 62368-1
IEC 60950-1
IEC 62368-1
UL 61010
UL 62368-1
-
EMC
- EN 55032/35
EN 61000-6-2/-6-4
-
EMI
- CISPR 32, FCC Part 15B Class A
-
Traffic Control
-
EMS
- IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 35 V/m
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV
IEC 61000-4-5 Surge: Power: 4 kV; Signal: 4 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8 PFMF
IEC 61000-4-11 Voltage Dips & Interruptions
-
Power Substation
-
Railway
-
Freefall
-
Shock
-
Vibration
-
Industrial Cybersecurity
- IEC 62443-4-1
IEC 62443-4-2
