Layer 3 modular managed 2.5 Gigabit Ethernet switch with 16 10GbE SFP+ ports, 3 slots for 16-port Gigabit or 2.5 Gigabit Ethernet modules, 2 isolated power supplies (90 to 264 VAC), -10 to 60°C operating temperature
Ethernet Interface
- 
1000/2500/10000BaseSFP Ports
- 
Out-of-band Management (OOBM)
- 1 x 8-pin RJ45 1GbE Ethernet port (MGMT)
 
 
- 
Module
- There are 3 module slots on the switch. Users can select different types of modules to insert into the switch. The modules that can be selected include 16-port modules with 1000BaseT(X), 1000/2500BaseT(X), 1000BaseSFP, or 1000/2500BaseSFP interfaces.
 
 Refer to Expansion Modules in the Accessories section for a full list of supported interface modules.
 
 
- 
Standards
- IEEE 802.1D-2004 for Spanning Tree Protocol
 IEEE 802.1p for Class of Service
 IEEE 802.1Q for VLAN Tagging
 IEEE 802.1s for Multiple Spanning Tree Protocol
 IEEE 802.1w for Rapid Spanning Tree Protocol
 IEEE 802.1X for Authentication
 IEEE 802.3ab for 1000BaseT(X)
 IEEE 802.3ad for Port Trunk with LACP
 IEEE 802.3x for Flow Control
 IEEE 802.3z for 1000BaseSX/LX/LHX/ZX
 IEEE 802.3bz for 2.5GBaseX
 IEEE 802.3ae for 10 Gigabit Ethernet
 IEEE 802.3az for Energy-Efficient Ethernet
 ITU-T G.8032 Ethernet Ring Protection Switching
 
 
 
Ethernet Software Features
- 
Management
- IPv4
 Flow control
 Back Pressure Flow Control
 DHCP Client
 ARP
 RARP
 LLDP
 Linkup Delay
 SMTP
 SNMP Trap
 SNMP Inform
 SNMPv1/v2c/v3
 RMON
 TFTP
 SFTP
 HTTP
 HTTPS
 Telnet
 Syslog
 Private MIB
 Port Mirroring (SPAN, RSPAN)
 
 
- 
Filter
- GMRP
 GVRP
 GARP
 802.1Q
 IGMP Snooping v1/v2/v3
 IGMP Querier
 
 
- 
Redundancy Protocols
- STP
 RSTP
 Turbo Ring v2
 Ring Coupling
 Multiple Dual-Homing
 Link Aggregation
 Network Loop Protection
 MSTP
 
 
- 
Routing Redundancy
- 
Security
- Broadcast storm protection
 Rate Limit
 Access control list
 Static port lock
 Sticky MAC
 HTTPS/SSL
 SSH
 RADIUS
 TACACS+
 Login and password policy
 Secure Boot
 
 
- 
Time Management
- SNTP
 IEEE 1588v2 PTP (hardware-based)
 NTP Server/Client
 NTP Authentication
 
 
- 
Protocols
- TCP/IP
 UDP
 ICMP
 ARP
 RARP
 TFTP
 DNS
 NTP Client
 DHCP Client
 802.1X
 QoS
 HTTPS
 HTTP
 Telnet
 SMTP
 SNMPv1/v2c/v3
 IPv4
 RMON
 Syslog
 
 
- 
Unicast Routing
- 
MIB
- P-BRIDGE MIB
 Q-BRIDGE MIB
 IEEE8021-SPANNING-TREE-MIB
 IEEE8021-PAE-MIB
 IEEE8023-LAG-MIB
 LLDP-EXT-DOT1-MIB
 LLDP-EXT-DOT3-MIB
 SNMPv2-MIB
 RMON MIB Groups 1, 2, 3, 9
 
 
 
Switch Properties
- 
MAC Table Size
- 
Max. No. of VLANs
- 
IGMP Groups
- 
Jumbo Frame Size
- 
Packet Buffer Size
- 
Priority Queues
- 
VLAN ID Range
 
Input/Output Interface
- 
Alarm Contact Channels
- 1 relay output with current carrying capacity of 2 A @ 30 VDC
 
 
 
Power Parameters
- 
Input Voltage
- 100-240 VAC, 50-60 Hz or 230-240 VDC (for each power supply)
 
 
- 
Operating Voltage
- 90-264 VAC, 47-63 Hz or 180-300 VDC (for each power supply)
 
 
- 
Overload Current Protection
- 
Reverse Polarity Protection
- 
Input Current
- Max. 2.703 A @ 110 VAC
 Max. 1.339 A @ 220 VAC
 Max. 1.615 A @ 180 VDC
 Max. 0.948 A @ 300 VDC
 
 
- 
Power Consumption (Max.)
- Max. 297 W @ 110 VAC
 Max. 287.3 W @ 220 VAC
 Max. 290.3 W @ 180 VDC
 Max. 284.3 W @ 300 VDC
 
 Note: These are the maximum power consumption ratings for the device with the maximum number of modules installed.
 
 
- 
Power Module
- 2 x slots (2 x PWR-300-HVA-IF power modules included)
 
 
 
Physical Characteristics
- 
IP Rating
- 
Dimensions
- 440 x 88 x 420 mm (17.32 x 3.46 x 16.54 in)
 
 
- 
Weight
- 
Fan Module
- 8 x slots (8 x XM-4000-FAN-R preinstalled)
 
 
- 
Installation
- 
Interactive Interface
- Onboard LCM display
 Push buttons for configuration
 
 
 
Environmental Limits
- 
Operating Temperature
- -10 to 60°C (-14 to 140°F)
 
 
- 
Storage Temperature (package included)
- -40 to 85°C (-40 to 185°F)
 
 
- 
Ambient Relative Humidity
- 5 to 95% (non-condensing)
 
 
 
Standards and Certifications
- 
Safety
- UL 62368-1
 UL 61010-2-201
 IEC 62368-1
 
 
- 
EMC
- EN 55032/35
 EN 61000-6-2/-6-4
 
 
- 
EMI
- CISPR 32, FCC Part 15B Class A
 
 
- 
EMS
- IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
 IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m
 IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV
 IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV
 IEC 61000-4-6 CS: 10 V
 IEC 61000-4-8 PFMF
 IEC 61000-4-11 Voltage Dips & Interruptions
 
 
- 
Railway
- 
Shock
- 
Vibration
- 
Package Drop Test
- 
Package Vibration Test