Layer 3 modular managed Gigabit Ethernet switch with 3 slots for 16-port Gigabit Ethernet modules, 8 10GbE SFP+ slots, 2 isolated power supplies (90 to 264 VAC), -10 to 60°C operating temperature
Ethernet Interface
-
1000/2500/10000BaseSFP Ports
-
1000BaseSFP Slots
-
Out-of-band Management (OOBM)
- 1 x 8-pin RJ45 1GbE Ethernet port (MGMT)
-
Module
- There are 3 module slots on the switch. Users can select different types of modules to insert into the switch. The modules that can be selected include 16-port modules with 1000BaseT(X) or 1000BaseSFP interfaces.
Refer to Expansion Modules in the Accessories section for a full list of supported interface modules.
-
Standards
- IEEE 802.1D-2004 for Spanning Tree Protocol
IEEE 802.1p for Class of Service
IEEE 802.1Q for VLAN Tagging
IEEE 802.1s for Multiple Spanning Tree Protocol
IEEE 802.1w for Rapid Spanning Tree Protocol
IEEE 802.1X for Authentication
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3ad for Port Trunk with LACP
IEEE 802.3x for Flow Control
IEEE 802.3z for 1000BaseSX/LX/LHX/ZX
IEEE 802.3ae for 10 Gigabit Ethernet
IEEE 802.3az for Energy-Efficient Ethernet
ITU-T G.8032 Ethernet Ring Protection Switching
Ethernet Software Features
-
Management
- IPv4
Flow control
Back Pressure Flow Control
DHCP Client
ARP
RARP
LLDP
Linkup Delay
SMTP
SNMP Trap
SNMP Inform
SNMPv1/v2c/v3
RMON
TFTP
SFTP
HTTP
HTTPS
Telnet
Syslog
Private MIB
Port Mirroring (SPAN, RSPAN)
-
Filter
- GMRP
GVRP
GARP
802.1Q
IGMP Snooping v1/v2/v3
IGMP Querier
-
Redundancy Protocols
- STP
RSTP
Turbo Ring v2
Ring Coupling
Multiple Dual-Homing
Link Aggregation
Network Loop Protection
MSTP
-
Routing Redundancy
-
Security
- Broadcast storm protection
Rate Limit
Access control list
Static port lock
Sticky MAC
HTTPS/SSL
SSH
RADIUS
TACACS+
Login and password policy
Secure Boot
-
Time Management
- SNTP
IEEE 1588v2 PTP (hardware-based)
NTP Server/Client
NTP Authentication
-
Protocols
- TCP/IP
UDP
ICMP
ARP
RARP
TFTP
DNS
NTP Client
DHCP Client
802.1X
QoS
HTTPS
HTTP
Telnet
SMTP
SNMPv1/v2c/v3
IPv4
RMON
Syslog
-
Unicast Routing
-
MIB
- P-BRIDGE MIB
Q-BRIDGE MIB
IEEE8021-SPANNING-TREE-MIB
IEEE8021-PAE-MIB
IEEE8023-LAG-MIB
LLDP-EXT-DOT1-MIB
LLDP-EXT-DOT3-MIB
SNMPv2-MIB
RMON MIB Groups 1, 2, 3, 9
Switch Properties
-
MAC Table Size
-
Max. No. of VLANs
-
IGMP Groups
-
Jumbo Frame Size
-
Packet Buffer Size
-
Priority Queues
-
VLAN ID Range
Input/Output Interface
-
Alarm Contact Channels
- 1 relay output with current carrying capacity of 2 A @ 30 VDC
Power Parameters
-
Input Voltage
- 100-240 VAC, 50-60 Hz or 230-240 VDC (for each power supply)
-
Operating Voltage
- 90-264 VAC, 47-63 Hz or 180-300 VDC (for each power supply)
-
Overload Current Protection
-
Reverse Polarity Protection
-
Input Current
- Max. 1.236 A @ 110 VAC
Max. 0.675 A @ 220 VAC
Max. 0.74 A @ 180 VDC
Max. 0.439 A @ 300 VDC
-
Power Consumption (Max.)
- Max. 134.2 W @ 110 VAC
Max. 132.3 W @ 220 VAC
Max. 133.2 W @ 180 VDC
Max. 131.8 W @ 300 VDC
Note: These are the maximum power consumption ratings for the device with the maximum number of modules installed.
-
Power Module
- 2 x slots (2 x PWR-300-HVA-IF power modules included)
Physical Characteristics
-
IP Rating
-
Dimensions
- 440 x 88 x 420 mm (17.32 x 3.46 x 16.54 in)
-
Weight
-
Fan Module
- 8 x slots (8 x XM-4000-FAN-R preinstalled)
-
Installation
-
Interactive Interface
- Onboard LCM display
Push buttons for configuration
Environmental Limits
-
Operating Temperature
- -10 to 60°C (-14 to 140°F)
-
Storage Temperature (package included)
- -40 to 85°C (-40 to 185°F)
-
Ambient Relative Humidity
- 5 to 95% (non-condensing)
Standards and Certifications
-
Safety
- UL 62368-1
UL 61010-2-201
IEC 62368-1
-
EMC
- EN 55032/35
EN 61000-6-2/-6-4
-
EMI
- CISPR 32, FCC Part 15B Class A
-
EMS
- IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 35 V/m
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV
IEC 61000-4-5 Surge: Power: 4 kV; Signal: 4 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8 PFMF
IEC 61000-4-11 Voltage Dips & Interruptions
-
Railway
-
Shock
-
Vibration
-
Package Drop Test
-
Package Vibration Test
