RS-485 remote I/O, 16 DIs, -10 to 75C operating temperature
Input/Output Interface
-
Buttons
-
Digital Input Channels
-
Isolation
Digital Inputs
-
Connector
- Screw-fastened Euroblock terminal
-
Counter Frequency
-
Digital Filtering Time Interval
-
Dry Contact
- On: short to GND
Off: open
-
I/O Mode
-
Points per COM
-
Sensor Type
- Dry contact
Wet Contact (NPN or PNP)
-
Wet Contact (DI to COM)
- On: 10 to 30 VDC
Off: 0 to 3 VDC
Serial Interface
-
Baudrate
-
Connector
-
No. of Ports
-
Parity
-
Pull High/Low Resistor for RS-485
- 1 kilo-ohm, 150 kilo-ohms
-
Serial Standards
-
Stop Bits
-
Surge
-
ESD
-
Data Bits
-
Flow Control
Serial Software Features
-
Industrial Protocols
- Modbus RTU Server (slave)
Power Parameters
-
Power Connector
- Screw-fastened Euroblock terminal
-
No. of Power Inputs
-
Input Voltage
-
Power Consumption
Physical Characteristics
-
Housing
-
Dimensions
- 27.8 x 124 x 84 mm (1.09 x 4.88 x 3.31 in)
-
Weight
-
Installation
- DIN-rail mounting
Wall mounting
-
Wiring
- I/O cable, 16 to 26 AWG
Power cable, 12 to 24 AWG
Environmental Limits
-
Operating Temperature
- -10 to 75°C (14 to 167°F)
-
Storage Temperature (package included)
- -40 to 85°C (-40 to 185°F)
-
Ambient Relative Humidity
- 5 to 95% (non-condensing)
-
Altitude
Standards and Certifications
-
EMC
-
EMI
- CISPR 32, FCC Part 15B Class A
-
EMS
- IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
IEC 61000-4-4 EFT: Power: 0.5 kV
IEC 61000-4-5 Surge: Power: 2 kV
IEC 61000-4-6 CS: 3 V
IEC 61000-4-8 PFMF
-
Safety
-
Shock
-
Vibration
