Industrial RS-232/422/485 to multi-mode fiber converter, ST connector, 2 kV isolation, 0 to 60°C operating temperature
Serial Interface
-
No. of Ports
-
Serial Standards
-
Baudrate
- 50 bps to 921.6 kbps (supports non-standard baudrates)
-
Flow Control
- ADDC® (automatic data direction control) for RS-485
-
Connector
- 5-pin terminal block
DB9 male
Multi-mode ST connector
-
Isolation
-
Optical Fiber
-
Optical Fiber
-
Pull High/Low Resistor for RS-485
- 150 kilo-ohm, 10 kilo-ohm, 4.7 kilo-ohm, 3.3 kilo-ohm, 1 kilo-ohm, 909 ohm, 822 ohm, 770 ohm, 500 ohm, 485 ohm
-
RS-485 Data Direction Control
- ADDC® (automatic data direction control)
-
Terminator for RS-485
- N/A, 120 ohms, 120 kilo-ohms
Serial Signals
-
RS-232
-
RS-422
-
RS-485-4w
-
RS-485-2w
Power Parameters
-
Input Current
-
Input Voltage
-
No. of Power Inputs
-
Overload Current Protection
-
Power Connector
-
Power Consumption
Physical Characteristics
-
Housing
-
IP Rating
-
Dimensions
- 30.3 x 70 x 115 mm (1.19 x 2.76 x 4.53 in)
-
Weight
-
Installation
Environmental Limits
-
Operating Temperature
-
Storage Temperature (package included)
- -40 to 85°C (-40 to 185°F)
-
Ambient Relative Humidity
- 5 to 95% (non-condensing)
Standards and Certifications
-
EMC
-
EMI
- CISPR 32, FCC Part 15B Class A
-
EMS
- IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 4 kV; Signal: 1 kV
IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m
IEC 61000-4-8 PFMF
-
Environmental Testing
- IEC 60068-2-1
IEC 60068-2-2
IEC 60068-2-3
-
Safety
-
Vibration
