IAP-2400AX

Hardware Specifications

Interfaces

5 10/100/1000BASE-T RJ45 Ethernet ports including
4 LAN ports (Ports 1 to 4)
1 WAN/LAN port (Port 5)

Wireless Connector

Built-in four RP-SMA female connectors

USB Port

1 USB 3.0 port

DI & DO Interfaces

2 Digital Input (DI):
Level 0: -24V~2.1V (±0.1V)
Level 1: 2.1V~24V (±0.1V)
Input Load to 24V DC, 10mA max.
2 Digital Output (DO):
Open collector to 24V DC, 100mA max.

Connector

Removable 6-pin terminal block for power input
Pin 1/2 for Power 1, Pin 3/4 for fault alarm, Pin 5/6 for Power 2

Reset Button

< 5 sec: System reboot
> 10 sec: Factory default

Enclosure

IP30 metal case

Installation

DIN-rail, desktop, wall-mounting

Dimensions (W x D x H)

50 x 135 x 135 mm

Weight

787g

Power Requirements – DC

9~54V DC, 1.8A

Power Consumption

Max. 5.9 watts/ 20BTU (No Loading at DC 54V)
Max.10.8 watts/ 36BTU (Full loading at DC 54V)

LED Indicators

System:
P1 (Green)
P2 (Green)
Alarm (Red)
I/O (Red)
Ethernet Interfaces (Ports 1-4 LAN Port and Port 5 WAN/LAN Port):
1000 LNK/ACT (Green)
10/100 LNK/ACT (Amber)
Wi-Fi:
5GHz(Green)

Wireless Specifications

Standard

IEEE 802.11a/an/ac/ax 5GHz (4Tx4R)

Band Mode

5GHz concurrent mode

Data Modulation

802.11ax: MIMO-OFDMA (BPSK / QPSK / 16QAM / 64QAM / 256QAM, 1024QAM)
802.11ac: MIMO-OFDM (BPSK / QPSK / 16QAM / 64QAM / 256QAM)
802.11a/g/n: OFDM (BPSK / QPSK / 16QAM / 64QAM)

Antenna

4 dBi external antennas with RP-SMA male connectors for Wi-Fi

Frequency Range

5GHz
America FCC: 5.180~5.240GHz, 5.745~5.825GHz
Europe ETSI: 5.180~5.700GHz

Operating Channels

5GHz
America FCC:
Non-DFS: 36, 40, 44, 48, 149,153,157,161,165
DFS: 52, 56, 60, 64, 100, 104, 108, 112, 116, 132, 136, 140

Europe ETSI:
Non-DFS: 36, 40, 44, 48
DFS: 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140

*5GHz channel list may vary in different countries according to their regulations.

Channel Width

20MHz, 40MHz, 80MHz, 160MHz

Data Transmission Rates

Transmit: 2400 Mbps* for 5 GHz
Receive: 2400Mbps* for 5 GHz

*The estimated transmission distance is based on the theory. The actual distance may vary in different environments.

Transmission Power

11a: 19.5dBm +/- 1.5dbm @54Mbps
11a/n: 19.5dBm+/- 1.5dbm @MCS7, HT20
17dBm@MCS7, HT40
11ac HT20: 20+/-1.5dBm @MCS8
11ac HT40: 17+/-1.5dBm @MCS9
11ac HT80: 14.5+/-1.5dBm @MCS9
11ax HT20: 20+/-1.5dBm @MCS9
11ax HT40: 17 +/- 1.5dBm @MCS9
11ax HT80: 14.5 +/- 1.5dBm @MCS11

Receiver Sensitivity

11a: -90Bm @54Mbps
11a/n: -85dBm @HT20, MCS7
-81dBm @HT40, MCS7
11ac: -90dBm +/- 2dBm @VHT20 MCS8
11ac: -85dBm +/- 2dBm @VHT40 MCS9
11ac: -68dBm +/- 2dBm @VHT80 MCS9
11ax: -61dBm +/- 2dBm @HE20 MCS11
11ax: -58dBm +/- 2dBm @HE40 MCS11
11ax: -55dBm +/- 2dBm @HE80 MCS11

Encryption Security

WPA3 Personal,WPA2/WPA3 Personal
WPA2 Personal (AES) ,WPA2 Personal (TKIP),WPA2 Personal (TKIP+AES)
WPA/WPA2 Personal (AES), WPA/WPA2 Personal (TKIP), WPA/WPA2 Personal (TKIP+AES)
WPA2 Enterprise, WPA/WPA2 Enterprise

Management Functions

Basic Management Interfaces

Web browser
SNMP v1, v2c
PLANET Smart Discovery utility and NMS controller supported

Secure Management Interfaces

TLS 1.1, TLS 1.2, TLS 1.3
SNMP v3

Operation Modes

Access Point (default)
Gateway
Repeater

LAN

Static IP/* DHCP Client

WAN

Static IP
Dynamic IP
PPPoE/PPTP/L2TP

VLAN

IEEE 802.1Q VLAN (VID: 1~4094)
SSID-to-VLAN mapping to up to 4 SSIDs

Wireless Security

Enable/Disable SSID Broadcast
Wireless MAC address filtering
User Isolation

Max. SSID

Max. Wireless Clients

150 (100 is suggested, depending on usage)

Wi-Fi Advanced

Auto Channel Selection
5-level Transmit Power Control :
– Max (100%)
– Efficient (75%)
– Enhanced (50%)
– Standard (25%) or Min (15%)
Client Limit Control
Coverage Threshold
*Wi-Fi channel analysis chart
Seamless Roaming
Beamforming
BSS Coloring
5GHz WLAN Partition
RTS Threshold

Wireless Roaming

IEEE 802.11k, 802.11v, and 802.11r

Wireless QoS

Supports Wi-Fi Multimedia (WMM)

System Management

Setup wizard
Remote management through PLANET DDNS/ Easy DDNS
Configuration backup and restore
Supports UPnP
Supports IGMP Proxy
Supports PPTP/L2TP/IPSec VPN Pass-through
Supports Captive Portal, RADIUS Server/Client (Gateway mode)
Diagnostics

Status Monitoring

Dashboard
System status/service
Statistics
Connection status

Event Management

Remote System Log
Local Event Log

Self-healing

Supports auto reboot settings per day/hour

Standards Conformance

Central Management

Regulatory Compliance

FCC Part 15 Class A, CE

Environment

Operating

Temperature: -40 ~ 75 degrees C
Relative humidity: 5 ~ 90% (non-condensing)

Storage

Temperature: -40 ~ 75 degrees C
Relative humidity: 5 ~ 90% (non-condensing)

Description
Warranty
Customer Reviews

Description

The IAP-2400AX Industrial 5GHz 802.11ax 2400Mbps Wireless Access Point with 5 10/100/1000T LAN Ports is equipped with an IP30 metal case for operation in industrial environments.

Hardware Specifications
Interfaces	5 10/100/1000BASE-T RJ45 Ethernet ports including 4 LAN ports (Ports 1 to 4) 1 WAN/LAN port (Port 5)
Wireless Connector	Built-in four RP-SMA female connectors
USB Port	1 USB 3.0 port
DI & DO Interfaces	2 Digital Input (DI): Level 0: -24V~2.1V (±0.1V) Level 1: 2.1V~24V (±0.1V) Input Load to 24V DC, 10mA max. 2 Digital Output (DO): Open collector to 24V DC, 100mA max.
Connector	Removable 6-pin terminal block for power input Pin 1/2 for Power 1, Pin 3/4 for fault alarm, Pin 5/6 for Power 2
Reset Button	< 5 sec: System reboot > 10 sec: Factory default
Enclosure	IP30 metal case
Installation	DIN-rail, desktop, wall-mounting
Dimensions (W x D x H)	50 x 135 x 135 mm
Weight	787g
Power Requirements – DC	9~54V DC, 1.8A
Power Consumption	Max. 5.9 watts/ 20BTU (No Loading at DC 54V) Max.10.8 watts/ 36BTU (Full loading at DC 54V)
LED Indicators	System: P1 (Green) P2 (Green) Alarm (Red) I/O (Red) Ethernet Interfaces (Ports 1-4 LAN Port and Port 5 WAN/LAN Port): 1000 LNK/ACT (Green) 10/100 LNK/ACT (Amber) Wi-Fi: 5GHz(Green)
Wireless Specifications
Standard	IEEE 802.11a/an/ac/ax 5GHz (4Tx4R)
Band Mode	5GHz concurrent mode
Data Modulation	802.11ax: MIMO-OFDMA (BPSK / QPSK / 16QAM / 64QAM / 256QAM, 1024QAM) 802.11ac: MIMO-OFDM (BPSK / QPSK / 16QAM / 64QAM / 256QAM) 802.11a/g/n: OFDM (BPSK / QPSK / 16QAM / 64QAM)
Antenna	4 dBi external antennas with RP-SMA male connectors for Wi-Fi
Frequency Range	5GHz America FCC: 5.180~5.240GHz, 5.745~5.825GHz Europe ETSI: 5.180~5.700GHz
Operating Channels	5GHz America FCC: Non-DFS: 36, 40, 44, 48, 149,153,157,161,165 DFS: 52, 56, 60, 64, 100, 104, 108, 112, 116, 132, 136, 140 Europe ETSI: Non-DFS: 36, 40, 44, 48 DFS: 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 *5GHz channel list may vary in different countries according to their regulations.
Channel Width	20MHz, 40MHz, 80MHz, 160MHz
Data Transmission Rates	Transmit: 2400 Mbps* for 5 GHz Receive: 2400Mbps* for 5 GHz *The estimated transmission distance is based on the theory. The actual distance may vary in different environments.
Transmission Power	11a: 19.5dBm +/- 1.5dbm @54Mbps 11a/n: 19.5dBm+/- 1.5dbm @MCS7, HT20 17dBm@MCS7, HT40 11ac HT20: 20+/-1.5dBm @MCS8 11ac HT40: 17+/-1.5dBm @MCS9 11ac HT80: 14.5+/-1.5dBm @MCS9 11ax HT20: 20+/-1.5dBm @MCS9 11ax HT40: 17 +/- 1.5dBm @MCS9 11ax HT80: 14.5 +/- 1.5dBm @MCS11
Receiver Sensitivity	11a: -90Bm @54Mbps 11a/n: -85dBm @HT20, MCS7 -81dBm @HT40, MCS7 11ac: -90dBm +/- 2dBm @VHT20 MCS8 11ac: -85dBm +/- 2dBm @VHT40 MCS9 11ac: -68dBm +/- 2dBm @VHT80 MCS9 11ax: -61dBm +/- 2dBm @HE20 MCS11 11ax: -58dBm +/- 2dBm @HE40 MCS11 11ax: -55dBm +/- 2dBm @HE80 MCS11
Encryption Security	WPA3 Personal,WPA2/WPA3 Personal WPA2 Personal (AES) ,WPA2 Personal (TKIP),WPA2 Personal (TKIP+AES) WPA/WPA2 Personal (AES), WPA/WPA2 Personal (TKIP), WPA/WPA2 Personal (TKIP+AES) WPA2 Enterprise, WPA/WPA2 Enterprise
Management Functions
Basic Management Interfaces	Web browser SNMP v1, v2c PLANET Smart Discovery utility and NMS controller supported
Secure Management Interfaces	TLS 1.1, TLS 1.2, TLS 1.3 SNMP v3
Operation Modes	Access Point (default) Gateway Repeater
LAN	Static IP/* DHCP Client
WAN	Static IP Dynamic IP PPPoE/PPTP/L2TP
VLAN	IEEE 802.1Q VLAN (VID: 1~4094) SSID-to-VLAN mapping to up to 4 SSIDs
Wireless Security	Enable/Disable SSID Broadcast Wireless MAC address filtering User Isolation
Max. SSID	4
Max. Wireless Clients	150 (100 is suggested, depending on usage)
Wi-Fi Advanced	Auto Channel Selection 5-level Transmit Power Control : – Max (100%) – Efficient (75%) – Enhanced (50%) – Standard (25%) or Min (15%) Client Limit Control Coverage Threshold *Wi-Fi channel analysis chart Seamless Roaming Beamforming BSS Coloring 5GHz WLAN Partition RTS Threshold
Wireless Roaming	IEEE 802.11k, 802.11v, and 802.11r
Wireless QoS	Supports Wi-Fi Multimedia (WMM)
System Management	Setup wizard Remote management through PLANET DDNS/ Easy DDNS Configuration backup and restore Supports UPnP Supports IGMP Proxy Supports PPTP/L2TP/IPSec VPN Pass-through Supports Captive Portal, RADIUS Server/Client (Gateway mode) Diagnostics
Status Monitoring	Dashboard System status/service Statistics Connection status
Event Management	Remote System Log Local Event Log
Self-healing	Supports auto reboot settings per day/hour
Standards Conformance
Central Management
Regulatory Compliance	FCC Part 15 Class A, CE
Environment
Operating	Temperature: -40 ~ 75 degrees C Relative humidity: 5 ~ 90% (non-condensing)
Storage	Temperature: -40 ~ 75 degrees C Relative humidity: 5 ~ 90% (non-condensing)

Warranty

Five (5) year warranty

ATOP Technologies

Cincoze

Falcon Electric

InHand Networks

Innodisk

Moxa

Patton

PLANET Technology

RuggON

Teltonika

Vecow

WoMaster

ATOP Technologies

Cincoze

Falcon Electric

InHand Networks

Innodisk

Moxa

Patton

PLANET Technology

RuggON

Teltonika

Vecow

WoMaster

PLANET Technology

IAP-2400AX

Frequently Bought Together:

Description

Warranty

Customer Reviews

IAP-2400AX

Thank you!

Your submission has been sent.

IAP-2400AX

Write a Review

PLANET Technology

IAP-2400AX

Frequently Bought Together:

Description

Warranty

Customer Reviews

IAP-2400AX