Entry-level managed Ethernet switch with 3 10/100BaseT(X) ports, 2 100BaseFX single-mode ports with SC connectors, -40 to 75°C operating temperature
Ethernet Interface
-
10/100BaseT(X) Ports (RJ45 connector)
- 3
Auto negotiation speed
Full/Half duplex mode
Auto MDI/MDI-X connection
-
100BaseFX Ports (single-mode SC connector)
-
Standards
- IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100BaseFX
IEEE 802.3x for flow control
IEEE 802.1D-2004 for Spanning Tree Protocol
IEEE 802.1p for Class of Service
IEEE 802.1Q for VLAN Tagging
IEEE 802.1w for Rapid Spanning Tree Protocol
Ethernet Software Features
-
Filter
- 802.1Q VLAN, GMRP, GVRP, IGMP v1/v2, Port-based VLAN
-
Industrial Protocols
-
Management
- Back Pressure Flow Control, BOOTP, DHCP Option 66/67/82, DHCP Server/Client, Flow control, IPv4/IPv6, LLDP, Port Mirror, RARP, RMON, SMTP, SNMP Inform, SNMPv1/v2c/v3, Syslog, Telnet, TFTP
-
MIB
- Bridge MIB, Ethernet-like MIB, MIB-II, P-BRIDGE MIB, RMON MIB Groups 1, 2, 3, 9, RSTP MIB
-
Redundancy Protocols
- RSTP, STP, Turbo Chain, Turbo Ring v1/v2
-
Time Management
Switch Properties
-
IGMP Groups
-
MAC Table Size
-
Max. No. of VLANs
-
Packet Buffer Size
-
Priority Queues
-
VLAN ID Range
Serial Interface
-
Console Port
- RS-232 (TxD, RxD, GND), 10-pin RJ45 (19200, n, 8, 1)
DIP Switch Configuration
-
Ethernet Interface
- Turbo Ring, Master, Coupler, Reserve
Input/Output Interface
-
Alarm Contact Channels
- Relay output with current carrying capacity of 1 A @ 24 VDC
Power Parameters
-
Input Voltage
- 12/24/48 VDC, Redundant dual inputs
-
Operating Voltage
-
Input Current
-
Overload Current Protection
-
Reverse Polarity Protection
-
Connection
- 1 removable 6-contact terminal block(s)
Physical Characteristics
-
Housing
-
IP Rating
-
Dimensions
- 53.6 x 135 x 105 mm (2.11 x 5.31 x 4.13 in)
-
Weight
-
Installation
- DIN-rail mounting, Wall mounting (with optional kit)
Environmental Limits
-
Operating Temperature
- -40 to 75°C (-40 to 167°F)
-
Storage Temperature (package included)
- -40 to 85°C (-40 to 185°F)
-
Ambient Relative Humidity
- 5 to 95% (non-condensing)
Standards and Certifications
-
Safety
-
EMC
-
EMI
- CISPR 32, FCC Part 15B Class A
-
EMS
- IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8 PFMF
-
Hazardous Locations
-
Maritime
-
Traffic Control
-
Freefall
-
Shock
-
Vibration
