
14/13/12th Gen Intel® Core™ Series Embedded GPU Computer, Supports 1x MXM 3.1 GPU Expansion Socket
Model Name | GM-1100 | |
---|---|---|
System | Processor |
• 14th Generation Intel® Raptor Lake-S Refresh Series CPU: |
Chipset | • Intel R680E Chipset | |
Memory | • 2x DDR5 SO-DIMM sockets, support Un-buffered and ECC Type memory, up to 64GB. - Core™ i9/i7: Support 5600/4800 MHz with Single Rank memory and 5200/4800 MHz with Dual Rank memory. - Core™ i5/i3/Pentium®/Celeron®/Intel® Processor: Support 4800 MHz. |
|
BIOS | • AMI BIOS | |
Graphics | Graphics Engine | • Integrated Intel® UHD Graphics 770: Core™ i9/i7/i5 • Integrated Intel® UHD Graphics 730: Core™ i3 • Integrated Intel® UHD Graphics 710: Pentium®/Celeron® |
Maximum Display Output | • Supports Triple Independent Display | |
DP | • 1x DisplayPort Connector (4096 x 2304@60Hz) *Verified maximum resolution: 3840x2160@ 60Hz |
|
HDMI | • 1x HDMI Connector (4096 x 2160@30Hz) *Verified maximum resolution: 3840x2160@ 30Hz |
|
VGA | • 1x VGA Connector (1920 x 1200 @60Hz) | |
Audio | Audio Codec | • Realtek® ALC888, High Definition Audio |
Line-out | • 1x Line-out, Phone Jack 3.5mm | |
Mic-in | • 1x Mic-in, Phone Jack 3.5mm | |
I/O | LAN | • 1x 2.5GbE LAN, RJ45 - Intel® I225 • 1x 1GbE LAN, RJ45 - Intel® I219 |
COM | • 4x RS-232/422/485 with Auto Flow Control (Supports 5V/12V), DB9 | |
USB | • 1x 20Gbps USB3.2 Gen2 x2, Type C • 3x 10Gbps USB3.2 Gen2 x1, Type A • 4x 5Gbps USB3.2 Gen1 x1, Type A |
|
Storage | SSD/HDD | • 2x 2.5" Front Accessible SATA HDD/SSD Bay Supporting Hot Swap Function (SATA 3.0) (Up to 15mm in Height) |
M.2 SSD | • 1x M.2 Key M Type 2280 Socket, Support PCIe Gen4 x4 NVMe SSD or SATA SSD (SATA3.0) • 1x M.2 SSD Shared by M.2 Key B Type 3052 Socket, Support PCIe Gen 3x2 NVMe SSD or SATA SSD (SATA3.0) • 2x M.2 SSD Shared by M.2 Key B Type 2242 Socket, Support PCIe Gen 4x2 NVMe SSD or SATA SSD (SATA3.0) |
|
RAID | • Support RAID 0/1/5/10 | |
Expansion | MXM Socket | • 1x MXM Carrier Board Socket for MXM GPU Module Expansion |
M.2 E Key Socket | • 1x M.2 Key E Type 2230 Socket (PCIe Gen 3x2 / USB2.0), Support Wireless/Intel CNVi Module Expansion | |
M.2 B Key Socket | • 1x M.2 Key B Type 3042/3052 Socket (PCIe Gen 3x2 / USB3.2 Gen2x1 / USB2.0 / SATA), Support 5G/Storage/Add-on Card Expansion • 2x M.2 Key B Type 2242 Socket (PCIe Gen 4x2 / USB2.0 / SATA ), Support Storage/Add-on Card Expansion |
|
SIM Socket | • 2x SIM Socket | |
CMI (Combined Multiple I/O) Interface | • 1x High Speed CMI Interface for optional CMI Module Expansion • 1x Low Speed CMI Interface for optional CMI Module Expansion |
|
CFM (Control Function Module) Interface | • 1x CFM IGN Interface for optional CFM-IGN Module Expansion | |
Other Function | External FAN Connector | • 2x External FAN Connector, 4-pin Terminal Block (Support Smart Fan by BIOS) |
Power Ignition Sensing | • Support Power Ignition Sensing Function with Delay Time Management and Selectable 12V/24V (With Optional CFM Module) |
|
Clear CMOS Switch | • 1x Clear CMOS Switch | |
Reset Button | • 1x Reset Button | |
Instant Reboot | • Support 0.2sec Instant Reboot Technology | |
Watchdog Timer | • Software Programmable Supports 256 Levels System Reset | |
Antenna Holes | • 2x Antenna Holes | |
Status LED Indicator | • HDD LED、GPIO LED、IGN LED、GPU LED、Ethernet LED | |
Power | Power Button | • 1x ATX Power On/Off Button |
Power Mode Switch | • 1x AT/ATX Mode Switch | |
Power Input | • 9-48 VDC, Single Power Source Connector Type: 2x 3-pin Terminal Block, Each Terminal Block Current Limitation is 15A • Power input voltage from 9V to 23V must use dual power connectors, power input voltage from 24V to 48V can use single power connector |
|
Remote Power On/Off | • 1x Remote Power On/Off, 2-pin Terminal Block | |
Max. Power Consumption | • 35W CPU: 187.51W • 65W CPU: 258.96W - Test conducted with CPU, 1x RAM, and 1x storage - 100% load during burn-in testing. |
|
Inrush Current (Peak) | • 35W CPU: 5.467A@24V • 65W CPU: 5.725A@24V |
|
Physical | Dimension ( W x D x H ) | • 260 x 200 x 85 mm |
Weight Information | • 4.73 kg | |
Mechanical Construction | • Extruded Aluminum with Heavy Duty Metal | |
Mounting | • Wall / Side / DIN-RAIL / VESA Mount | |
Physical Design | • Fanless Design • Cableless Design • Jumper-less Design • Unibody Design |
|
Reliability & Protection | Reverse Power Input Protection | • Yes |
Over Voltage Protection | • Protection Range: 51~58V • Protection Type: shut down operating voltage, re-power on at the preset level to recover |
|
Over Current Protection | • 30A | |
CMOS Battery Backup | • SuperCap Integrated for CMOS Battery Maintenance-free Operation | |
MTBF | • 313,541 Hours - Database: Telcordia SR-332 Issue3, Method 1, Case 3 |
|
Operating System | Windows | • Windows®11, Windows®10 |
Linux | • Ubuntu Desktop 22.04 LTS | |
Environment | Operating Temperature | • 35W TDP Processor: -40°C to 70°C • 65W TDP Processor with external FAN: -40°C to 60°C * PassMark BurnInTest: 100% CPU, 2D/3D Graphics (without thermal throttling) * With extended temperature peripherals; Ambient with air flow * According to IEC60068-2-1, IEC60068-2-2, IEC60068-2-14 |
Storage Temperature | • -40°C to 70°C | |
Relative Humidity | • 95%RH @ 70°C (non-Condensing) | |
Shock | • MIL-STD-810H | |
Vibration | • MIL-STD-810H | |
EMC | • CE, UKCA, FCC, ICES-003 Class A • EN 50155 (EN 50121-3-2 Only) • E-mark |
|
EMI | • CISPR 32 Conducted & Radiated: Class A • EN/BS EN 50121-3-2 Conducted & Radiated: Class A • EN/BS EN IEC 61000-3-2 Harmonic current emissions: Class A • EN/BS EN 61000-3-3 Voltage fluctuations & flicker • FCC 47 CFR Part 15B, ICES-003 Conducted & Radiated: Class A |
|
EMS | • EN/IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV • EN/IEC 61000-4-3 RS: 80 MHz to 1000 MHz: 20 V/m • EN/IEC 61000-4-4 EFT: AC Power: 2 kV; Signal: 2 kV • EN/IEC 61000-4-5 Surges: AC Power: 2 kV • EN/IEC 61000-4-6 CS: 10V (**Compliant with the standard when utilizing shielded cable.) • EN/IEC 61000-4-8 PFMF: 50 Hz, 1A/m • EN/IEC 61000-4-11 Voltage Dips & Voltage Interruptions: 0.5 cycles at 50 Hz |
|
Safety | • UL, cUL , CB, IEC, EN 62368-1 |